Please use this identifier to cite or link to this item: http://kmutnb-ir.kmutnb.ac.th/jspui/handle/123456789/563
Title: Development of Learning Activities on Torsion Testing Using a Test Kit for Undergraduate Students in Automotive Technology (Continuing Program)
การพัฒนาชุดกิจกรรมการเรียนรู้เรื่องการทดสอบแรงบิดร่วมกับชุดทดสอบ สำหรับนักศึกษาหลักสูตรเทคโนโลยีบัณฑิต สาขาเทคโนโลยียานยนต์ (ต่อเนื่อง)
Authors: TANUNCHAI SRIWONG
ธนัญชัย ศรีวงษ์
SURAWUT YANIL
สุรวุฒิ ยะนิล
King Mongkut's University of Technology North Bangkok
มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ
sarawuty@kmutnb.ac.th
Keywords: learning activity package
 torsion testing
 automotive technology
ชุดกิจกรรม
 การพัฒนาชุดกิจกรรมการเรียนรู้
 การทดสอบแรงบิดร่วมกับชุดทดสอบ 
Issue Date: 17-Nov-2026
Publisher: King Mongkut's University of Technology North Bangkok
Abstract:  This study aimed to: 1) investigate instructional problems and approaches in the Automotive Technology Testing course; 2) examine the torsion angle under variations in material type, diameter, and specimen length; 3) develop a torsion testing learning activity package integrated with a testing apparatus; 4) compare students’ learning achievement with a specified criterion; and 5) evaluate student satisfaction. The sample consisted of 30 undergraduate students in Automotive Technology (Continuing Program). The research instruments included a problem-recording form, a learning activity package, an appropriateness evaluation form, and a skill assessment form, with content validity ranging from 0.60 to 1.00. Data were analyzed using mean, standard deviation, and t-test. The results showed that the learning activity package had the highest level of appropriateness (= 4.83, S.D. = 0.42) and an efficiency of 81.10/82.77, exceeding the criterion. The post-learning achievement score was 86.56 (S.D. = 3.50), significantly higher than the 80% criterion at the 0.05 level. Student satisfaction was also at the highest level (= 4.24, S.D. = 0.70). Furthermore The experiment involved testing round shafts made of different materials. A SUS304 stainless steel round shaft with a diameter of 6 mm and a length of 200 mm exhibited a maximum torque of 28.50 N.m and a torsional angle of 5,556 degrees. 
 การวิจัยครั้งนี้มีวัตถุประสงค์เพื่อ 1) ศึกษาสภาพปัญหาและแนวทางการจัดการเรียนการสอนรายวิชาการทดสอบทางเทคโนโลยียานยนต์ 2) ศึกษาขนาดโมเม้นต์สูงสุดและการเกิดมุมบิดเมื่อมี การเปลี่ยนแปลงของ วัสดุ ขนาดเส้นผ่านศูนย์กลาง และ ความยาว ที่แตกต่างกัน 3) พัฒนา ชุดกิจกรรมการเรียนรู้เรื่องการทดสอบแรงบิดร่วมกับชุดทดสอบ 4) เปรียบเทียบผลสัมฤทธิ์ ทางการเรียนกับเกณฑ์ และ 5) ศึกษาความพึงพอใจของนักศึกษา กลุ่มตัวอย่างเป็นนักศึกษา ระดับปริญญาตรี สาขาเทคโนโลยียานยนต์ (ต่อเนื่อง) จำนวน 30 คน เครื่องมือวิจัยประกอบด้วย แบบบันทึกสภาพปัญหาชุดกิจกรรม แบบประเมินความเหมาะสม และ แบบประเมินทักษะ ค่าความตรง 0.60–1.00 วิเคราะห์ข้อมูล โดยใช้ค่าเฉลี่ย ส่วนเบี่ยงเบนมาตรฐาน และ t-test ผลการวิจัยพบว่า ชุดกิจกรรมมีความเหมาะสม อยู่ในระดับมากที่สุด (= 4.83, S.D. = 0.42) มีประสิทธิภาพ 81.10/82.77 สูงกว่าเกณฑ์ ผลสัมฤทธิ์ทางการเรียนหลังเรียนเท่ากับ 86.56 (S.D. = 3.50) สูงกว่าเกณฑ์ร้อยละ 80 อย่างมีนัยสำคัญทางสถิติที่ระดับ 0.05 และความพึงพอใจ อยู่ในระดับมากที่สุด (= 4.24, S.D. = 0.70) นอกจากนี้ การทดลองเพลากลมของวัสดุต่างชนิด เพลากลมเหล็กหล้าไร้สนิม ชนิด SUS304 เส้นผ่านศูนย์กลางเท่ากับ 6 mm ขนาดความยาวเท่ากับ 200 mm รับแรงบิดได้สูงสุดเท่ากับ 28.50 N.m และ เกิดมุมบิดเท่ากับ 5,556 องศา 
URI: http://kmutnb-ir.kmutnb.ac.th/jspui/handle/123456789/563
Appears in Collections:FACULTY OF TECHNICAL EDUCATION

Files in This Item:
File SizeFormat 
s6702017856145.pdf7.76 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.